[1] answer: 

      To resolve the usage problem of SDW-series WLAN card, follow the steps below to modify / re-install driver

      and configure the security setting (if any is used in AP device):

 

      [a] Remove unnecessary files from your handheld:

          Low storage space in your handheld will sometimes cause the usage problem
           of application program, please go under "setting > system > remove programs"
          to check on if there is any unnecessary program can be temporarily removed,
          you can also save your storage space by go through all the directories in your handheld
          and delete the unused files.

      (b) Re-install driver:

          [b-1] Download driver

              Please refer to the model number of your WiFi card and check on the version number of

              operating system of your handheld ( Note: you can find out this information under "setting

              > system > about" page in your handheld ) and choose one of the following 5 links to

              download the correct driver into your desktop (or laptop)     

              (i) SDW-820 / 822 (IEEE 802.11b) driver for PPC2003 SE of Windows CE OS

                http://60.248.111.19/DOWNLOAD/sdw-820%20driver%20for%20PPC2003/wlan11b-14C.CAB

 

              (ii) SDW-820 / 822 (IEEE 802.11b) driver for WM5.0 of Windows CE OS

                Download

 

               (iii) SDW-820 / 822 (IEEE 802.11b) driver for SmartPhone of Windows CE OS

                Download

              (iv) SDW-821[IEEE 802.11b / g] driver for WM5.0 / PPC2003 of Windows CE OS
                http://60.248.111.19/DOWNLOAD/sdw-821%20driver%20for%20PPC200X-WM5.0/wlan11g206.CAB

 

      
              (v) SDW-821[IEEE 802.11b / g] driver for SmartPhone of Windows CE OS

                Download

              (You can also find these files in the table http://www.spectec.com.tw/Download.htm#wlan)

          [b-2] install driver:

             Please refer to this manual to install the driver that you have downloaded during [b-1] step:
                http://60.248.111.19/download/wlan-11b/sdw-detailed-install.pdf
           

               (Note: file name listed in this manual are just for an example, you can learn the regular steps from it)

          [b-3] configure SDW series wifi card

             To establish connect between handheld and AP device you have to configure your wifi card the same
             security setting as that of AP device ( if any security setting is used), please ask administrator of AP device
             if there is any security setting used in AP device, and refer to this manual to do the configure:
               http://60.248.111.19/download/manual/security-setting.pdf

               ( Note: steps listed in this manual are alike for different types of handheld)

      (c) Software reset your handheld and check on connect status

               Please refer to this manual to check on the status of your wifi card
               http://60.248.111.19/download/wlan-11b/quick%20setup.pdf

             (Note: steps listed in this manual are alike for different types of handheld)

   
             (You can also find these manual here http://www.spectec.com.tw/wlan.htm)

 

back to top

 

 

 

  [2] answer:


            step 1.Install palm driver  SdioDriver.prc

 

               OS 5.0: http://WWW.SPECTEC.COM.TW/download/gps-palm-os5/SdioDriver.prc

               OS 4.0: http://WWW.SPECTEC.COM.TW/download/gps-palm-os4/SdioDriver.prc

 

               and SDIOUART_Release.prc

 

               OS 5.0: http://WWW.SPECTEC.COM.TW/download/gps-palm-os5/SDIOUART_Release.prc

               OS 4.0: http://WWW.SPECTEC.COM.TW/download/gps-palm-os4/SDIOUART_Release.prc

 


 
            step 2.Soft reset your PDA.

      To work with the GPS application:
 
            step 3.Click preferences icon.
 
            step 4.Select the option "connection". A screen for the connection appears
 
            step 5.Tap New in this window.
 
            step 6.Type SD in the Name field.
 
            step 7.Set connect to as Modem  and via as ARSDIOSerial
 
            step 8.Select Details to set the baudrate.
 
            step 9.Set the speed as 9600bps.
 
            step 10.Open the GPS application .
 
            step 11.Press the menu button.
 
            step 12.From the menu click GPS and then select Details.
 
            step 13.click the GPS icon and select NMEA from the listed option.
 
            step 14.Press the menu button.
 
            step 15.From the menu click option and then select set connection.
 
            step 16.Now check the name "SD" in the available connections.If there is no such name then proceed the steps from 6 to 10.
 
            step 17.select GPS icon
 
            step 18.Now you will hear a beep sound and see no cross mark on the icon .
 
            step 19.You will also see 'Init' followed by the number of statellites  displayed near the icon and change in the latitude

                    longitude field.
 

 

      Here is the list of Palm OS handhelds that we have tested SDG-810 using standard GPS application ( TripPilot, PathAway,

      cotoGPS and GPS Tracker):

 

             1.M505 - OS Version 4.0
             2.Tungsten T - OS Version 5.0
             3.Tungsten T3 - OS Version 5.2.1
             4.Zire31 - OS Version 5.2.8
             5.E2 - OS Version 5.4.7
  

                    back to top




                                                   

 [3] answer:


        If the PDA is Treo650 please follow the procedure below and then proceed.


         (i)Copy the MMCBulverdeIntelDrv_Device.prc

            http://WWW.SPECTEC.COM.TW/download/gps-palm-treo650/MMCBulverdeIntelDrv_Device.prc


         (ii)Install Filez.prc

            http://WWW.SPECTEC.COM.TW/download/gps-palm-treo650/Filez.prc

 

         (iii)Open the FileZ application .
         (iv)Click the 'View and Edit Files' button.
         (v)Select the  MMCBulverdeIntelDrv_Device.prc under Card and then press the menu button.
         (vi)From the menu click Item and then select Copy.
         (vii)Choose the Destination folder as Internal and then press OK.
         (viii)Close the FileZ application.
         (ix)Soft reset your PDA.
         (x)To confirm the successfull installation of the slot driver(MMCBulverdeIntelDrv_Device.prc) try to delete the slot

             driver(SlotDriver:SDIO-sdsd) from the PDA and an error message will pop up.


                    back to top

 

 [4] answer:

         Wlan utility that bundled with SDW-820 / 822 card driver is for earlier edition of OS, SPECTEC has stopped supporting

         this utility for greater editions of OS. SDW-821 driver is not equipped with this tool, it is designed for displaying

         connect status of WiFi card, not for a tool to configure SDW-820/822 card. You can find many similar tools from other

         third-party software providers's web site, here is one of link information obtained from internet  click here

 

                    back to top

 

 [5] answer:

      [a] Remove unnecessary files from your handheld:

          Low storage space in your handheld will sometimes cause the usage problem
           of application program, please go under "setting > system > remove programs"
          to check on if there is any unnecessary program can be temporarily removed,
          you can also save your storage space by go through all the directories in your handheld
          and delete the unused files.

      (b) Install driver:

          [b-1] Download driver

              Please download the compression format file of SDV-841 driver from link below     
                    Download

              (You can also find these files in the table here  http://www.spectec.com.tw/Download.htm#video

          [b-2] unpack the downloaded compression file (sdv841driver.rar) under desktop (or laptop)

              into 2 files:  NVD541.ARMS_Spectec.CAB  &   SdkCerts.cab

          [b-3] Copy these 2 files into handheld under the directory where you want to store them 

          [b-4] First execute SdkCerts.cab and then NVD541.ARMS_Spectec.CAB directly under handheld  

      (c)  Configure SDV-841 

          Please refer to this manual to configure and active SDV-841

          Detailed Configure Guide         

         (Note: steps listed in this manual are alike for different type of handheld] 

          You can also find this manual here http://www.spectec.com.tw/sdv.htm 

  
 

back to top

 

 

 

  [6]answer:

 

       [1]  Install driver:

 

          a.  Download compressed files into your desktop (or lapto)

             download

 

          b.   Establish connect between handheld and desktop (or laptop) with USB wire,

              run ActiveSync program and make sure desktop (or laptop) can access handheld

 

          c.   Execute Spectec-GPS.exe in your desktop (or laptop)

 

          d.    Follow the install wizard to install driver

 

back to top

 

    [8] Answer:

 

        Please re-install SDW-821 by using this driver

        Driver of SDW-821 Co-Existence with BT

       

        Please refer to answer of question 1 for obtain the

        regular steps to install driver and use it

 

back to top