|
To Install and Use
Wi-Fi:
1. Power off your Q9m or Q8
2. Insert your mini SDIO Wi-Fi card in the miniSD slot on the side of your
device.
3. Power on your Q9m or Q8.
4. Install attached Wi-Fi Driver .cab file from your PC with your phone
connected to the PC via USB cable.
5. Install the driver in your directory on the device
6. Power Cycle your phone (on/off)
You will be prompted to configure Wi-Fi Power, select the setting of your
choice (Note: A change in setting can impact
your battery
life).
To Access Wi-Fi Settings
1. Hold the ¡§HOME¡¨ button from the home screen for 3 seconds to access the
¡¥Quick List¡¦ and select ¡¥Wireless Manager.¡¦
2. Press the right soft key for Menu and select Wi-Fi Settings.
3. Select the Wi-Fi network visible to you.
4. To connect to a network, select one from this list or select New¡K
5. Enter the network name if you select New¡K and set the correct options if this
is a hidden and/or ad-hoc network in this
prompt. Press Next.
6. In the next prompt, select the type of authentication the network is using
(Open, Shared, WPA, WPA-PSK).
7. Next, select the type of data encryption (Disabled, WEP, TKIP).
8. Next, enter the network key and press Next.
9. Press Finish.
Note: If you are connecting to an unsecured network, you should not have to
change any of the default settings. |
