Special Features:

 

-World First miniSDIO WLAN Card
-UltraLow Profile
-UltraLow power consumption
-Pocket PC/PDA Phone (Smartphone)
-Skype Compatible

Key Specifications:

Interface

SDIO  1.0

Frequency

2.4 GHz band direct conversion transceiver

Security

WEP, WPA and WPA_TKIP Encrypt Ready

Radio Type

IEEE 802.11b support DSSS system

Operating Channels

1-14 channels

TX Data Rate

1, 2, 5.5, 11 Mbps Data Rate

Low Voltage

< Receive mode: 60 mA
< Transmit mode: 116 mA for 15 dBm Pout
< Avg. Operation: 90 mA

Support

< STA (Ad-hoc and infrastructure) and AP mode
< DCF/PCF

OS Support

Windows Mobile 2003 Second Edition (Pocket PC 2003 SE)
Windows Mobile 5.0 / 6.0 for PDA/Smartphone

Weight

Approx. 1.5g

 

*All specifications are subject to change without prior notice.

Compatibility List

Suitable Model

 

HP

h2200, rz1700, hw6515, hx2110, hx2750,rx1950, hx6510, rz1720

DELL

AXIN X30, AXIN X51,

ASUS

p505

iPAQ

5450, 7515

Toshiba

e850

Palm

Treo 750v

Dopod

818, 828

Eten

m-600, m-500

acer

n30-B, n300(wm5.0)

O2(Dopod 818)

xda II , xda Iis, xda II mini

Qtek

s110

i-mate

PDA2K , PH10B, Jam

Mio

168,168RS, A701

Toshiba

e830

Medion 967

 

Fujitsu Siemens

 

Yakumo delta 300GPS

 

Unitech

PA600

 

Unsuitable Model :

Sagem MYS-7 , DA04M , Toshiba e350, I Do S600 ,Motorola MPX220, Acer n10,Yakumo Alpha-x,Qtek8080 smartphone, Toshiba e400, Toshiba e800, Toshiba e310, Dopod 818 pro wm5.0_O2 mini wm5.0(MDA compact II), Medion 96710

 
SDW-822 (special version for MOTO Q8 / Q9C / Q9m)
Key Specifications:

Network Standard Support

IEEE 802.11b

Network Architectures

< STA (AD-hoc and infrastructure) and AP mode
< DCF / PCF

Frequency

2.4 GHZ band Direct conversion transceiver

Security

40-128 bit WEP, TKIP, WPA; AES, WPAII, LEAP, PEAP (COMPATIBLE) 

Radio Type

IEEE 802.11b support DSSS system

Operating Channels

1-14 channels

Date Rate

1 , 2 ,5.5 ,11 Mbps Date Rate

Power Consumption

< Avg. Operation: 95 -105mA
< Receive mode: 60 mA
< Transmit mode: 116 mA for 15 dBm Pout

Operating Voltage

3.0 V - 3.5 V

OS Support

Windows Mobile 6.0

 

*All specifications are subject to change without prior notice.

Installation Procedure from Motorola Customer Service 

Wi-Fi is currently only supported on the Moto Q9m, and the Moto Q8. Using Wi-Fi does require a third party mini SDIO Wi-Fi card.
 

 

To Install and Use Wi-Fi:

1. Power off your Q9m or Q8
2. Insert your mini SDIO Wi-Fi card in the miniSD slot on the side of your device.
3. Power on your Q9m or Q8.
4. Install attached Wi-Fi Driver .cab file from your PC with your phone connected to the PC via USB cable.
5. Install the driver in your directory on the device
6. Power Cycle your phone (on/off)
You will be prompted to configure Wi-Fi Power, select the setting of your choice (Note: A change in setting can impact your battery life).

To Access Wi-Fi Settings

1. Hold the “HOME” button from the home screen for 3 seconds to access the ‘Quick List’ and select ‘Wireless Manager.’
2. Press the right soft key for Menu and select Wi-Fi Settings.
3. Select the Wi-Fi network visible to you.
4. To connect to a network, select one from this list or select New…
5. Enter the network name if you select New… and set the correct options if this is a hidden and/or ad-hoc network in this prompt. Press Next.
6. In the next prompt, select the type of authentication the network is using (Open, Shared, WPA, WPA-PSK).
7. Next, select the type of data encryption (Disabled, WEP, TKIP).
8. Next, enter the network key and press Next.
9. Press Finish.

Note: If you are connecting to an unsecured network, you should not have to change any of the default settings.