|
|
|
|
|
|
Index
====== (Please click links below to read the detailed content)
¡@
(1)What should I do if my SDW WiFi card work
abnormally
¡@
¡@
[3]How to use SDG-810
in Treo650
¡@
[4]Why I can not use WLAN utility in my handheld
¡@
[5]How to use Video Out device (SDV-841) for real
time display (Under WM 5.0 edition of Windows CE OS)
¡@
¡@
[8]Bluetooth can not dial out when SDW-821 driver is installed in PDA
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
[1] answer:
¡@
To resolve the usage problem of SDW-series WLAN card, follow the steps below to modify / re-install driver
and configure the security setting (if any is used in AP device):
¡@
[a] Remove
unnecessary files from your handheld:
Low storage space in your handheld will sometimes
cause the usage problem
of application program, please go
under "setting > system > remove programs"
to check on if there is any unnecessary program
can be temporarily removed,
you can also save your storage space by go through
all the directories in your handheld
and delete the unused files.
(b) Re-install driver:
[b-1] Download driver
Please
refer to the model number of your WiFi card and check on the version number of
operating system of your handheld ( Note: you can find out this information under "setting
> system > about" page in your handheld ) and choose one of the following 5 links to
download the
correct driver into your desktop (or laptop)
(i) SDW-820 / 822 (IEEE 802.11b) driver for PPC2003 SE
of Windows CE OS
http://60.248.111.19/DOWNLOAD/sdw-820%20driver%20for%20PPC2003/wlan11b-14C.CAB
¡@
(ii) SDW-820 / 822 (IEEE 802.11b) driver for WM5.0 of Windows CE OS
¡@
(iii) SDW-820 / 822 (IEEE 802.11b) driver for SmartPhone of Windows CE OS
Download
(iv)
SDW-821[IEEE 802.11b / g] driver for WM5.0 / PPC2003
of Windows CE OS
http://60.248.111.19/DOWNLOAD/sdw-821%20driver%20for%20PPC200X-WM5.0/wlan11g206.CAB
¡@
(v) SDW-821[IEEE 802.11b / g]
driver for SmartPhone of Windows CE OS
Download
(You can also find these
files in the table
http://www.spectec.com.tw/Download.htm#wlan)
[b-2] install driver:
Please
refer to this manual to install the driver that you have downloaded during [b-1]
step:
http://60.248.111.19/download/wlan-11b/sdw-detailed-install.pdf
(Note: file name listed in this manual are just for an example, you can learn
the regular steps from it)
[b-3] configure SDW series wifi card
To establish connect between handheld and AP device you have to
configure your wifi card the same
security setting as that of AP device ( if any security setting is
used), please ask administrator of AP device
if there is any security setting used in AP device, and refer to
this manual to do the configure:
http://60.248.111.19/download/manual/security-setting.pdf
( Note: steps listed in this manual are alike for
different types of handheld)
(c) Software reset your handheld and check on connect
status
Please refer to this manual to check on the status of your wifi
card
http://60.248.111.19/download/wlan-11b/quick%20setup.pdf
(Note: steps listed in this manual are alike for different types of
handheld)
(You can also find these manual here
http://www.spectec.com.tw/wlan.htm)
¡@
¡@
¡@
¡@
[2] answer:
step 1.Install palm
driver SdioDriver.prc
¡@
OS 5.0: http://WWW.SPECTEC.COM.TW/download/gps-palm-os5/SdioDriver.prc
OS 4.0: http://WWW.SPECTEC.COM.TW/download/gps-palm-os4/SdioDriver.prc
¡@
and SDIOUART_Release.prc
¡@
OS 5.0: http://WWW.SPECTEC.COM.TW/download/gps-palm-os5/SDIOUART_Release.prc
OS 4.0: http://WWW.SPECTEC.COM.TW/download/gps-palm-os4/SDIOUART_Release.prc
¡@
step 2.Soft reset your PDA.
To work with the GPS application:
step 3.Click preferences icon.
step 4.Select the option "connection". A screen for the connection appears
step 5.Tap New in this window.
step 6.Type SD in the Name field.
step 7.Set connect to as Modem and via as ARSDIOSerial
step 8.Select Details to set the baudrate.
step 9.Set the speed as 9600bps.
step 10.Open the GPS application .
step 11.Press the menu button.
step 12.From the menu click GPS and then select Details.
step 13.click the GPS icon and select NMEA from the listed option.
step 14.Press the menu button.
step 15.From the menu click option and then select set connection.
step 16.Now check the name "SD" in the available connections.If there is no such
name then proceed the steps from 6 to 10.
step 17.select GPS icon
step 18.Now you will hear a beep sound and see no cross mark on the icon .
step 19.You will also see 'Init' followed by the number of statellites
displayed near the icon and change in the latitude
longitude field.
¡@
¡@
Here is the list of Palm OS handhelds that we have tested SDG-810 using standard GPS application ( TripPilot, PathAway,
cotoGPS and GPS Tracker):
¡@
1.M505 - OS Version 4.0
2.Tungsten T - OS Version 5.0
3.Tungsten T3 - OS Version 5.2.1
4.Zire31 - OS Version 5.2.8
5.E2 -
OS Version 5.4.7
back to top
[3] answer:
If the PDA is Treo650 please follow the
procedure below and then proceed.
(i)Copy the MMCBulverdeIntelDrv_Device.prc
http://WWW.SPECTEC.COM.TW/download/gps-palm-treo650/MMCBulverdeIntelDrv_Device.prc
(ii)Install Filez.prc
http://WWW.SPECTEC.COM.TW/download/gps-palm-treo650/Filez.prc
¡@
(iii)Open the FileZ application .
(iv)Click the 'View and Edit Files' button.
(v)Select the MMCBulverdeIntelDrv_Device.prc under Card and then press the
menu button.
(vi)From the menu click Item and then select Copy.
(vii)Choose the Destination folder as Internal and then press OK.
(viii)Close the FileZ application.
(ix)Soft reset your PDA.
(x)To confirm the successfull installation of the slot
driver(MMCBulverdeIntelDrv_Device.prc) try to delete the slot
driver(SlotDriver:SDIO-sdsd) from the PDA and an
error message will pop up.
back to top
¡@
[4] answer:
Wlan utility that bundled with SDW-820 / 822 card driver is for earlier edition of OS, SPECTEC has stopped supporting
this utility for greater editions of OS. SDW-821 driver is not equipped with this tool, it is designed for displaying
connect status of WiFi card, not for a tool to configure SDW-820/822 card. You can find many similar tools from other
third-party software providers's web site, here is one of link information obtained from internet click here
¡@
¡@
[5] answer:
[a] Remove
unnecessary files from your handheld:
Low storage space in your handheld will sometimes
cause the usage problem
of application program, please go
under "setting > system > remove programs"
to check on if there is any unnecessary program
can be temporarily removed,
you can also save your storage space by go through
all the directories in your handheld
and delete the unused files.
(b) Install driver:
[b-1] Download driver
Please
download the compression format file of SDV-841 driver from link below
Download
(You can also find these
files in the table here
http://www.spectec.com.tw/Download.htm#video
[b-2] unpack the
downloaded compression file (sdv841driver.rar) under desktop (or laptop)
into 2 files: NVD541.ARMS_Spectec.CAB & SdkCerts.cab
[b-3] Copy these 2 files
into handheld under the directory where you want to store them
¡@
[b-4] First execute SdkCerts.cab and then NVD541.ARMS_Spectec.CAB directly under
handheld
(c) Configure SDV-841
¡@
Please refer to this manual to configure and active SDV-841
(Note: steps listed in this manual are alike for different type of handheld]
¡@
You can also find this manual here http://www.spectec.com.tw/sdv.htm
¡@
¡@
¡@
¡@
[6]answer:
¡@
[1] Install driver:
¡@
a. Download compressed files into your desktop (or lapto)
¡@
b. Establish connect between handheld and desktop (or laptop) with USB wire,
run ActiveSync program and make sure desktop (or laptop) can access handheld
¡@
c. Execute Spectec-GPS.exe in your desktop (or laptop)
¡@
d. Follow the install wizard to install driver
¡@
¡@
¡@
¡@
¡@
[8] Answer:
¡@
Please re-install SDW-821 by using this driver
Driver of SDW-821 Co-Existence with BT
Please refer to answer of question 1 for obtain the
regular steps to install driver and use it
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
¡@
